Niagara Cutter 5/8

Description

(TiAlN is suitable for a range of materials, but TiCN or uncoated end mills are recommended for machining aluminum.) The carbide substrate is harder than high-speed or cobalt steel, making it more wear resistant at high speeds and. The round shank accommodates a variety of holders. If heat is not reduced effectively, the tools cutting edges will dull and additional material buildup can occur. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The TiAlN coating resists heat better than TiN and TiCN coatings, increasing tool life and performance. (TiAlN is suitable for a range of materials, but TiCN or uncoated end mills are recommended for machining aluminum.) The carbide substrate is harder than high-speed or cobalt steel, making it more wear resistant at high speeds and providing longer tool life. Cutting diameter tolerance is +0.000 to -0.002. Two-flute designs offer the efficient chip removal, but more flutes provide a smoother finish. End mills are designed to remove material and create multi-dimensional shapes and profiles. It also offers increased hardness for abrasion resistance and may reduce the need for lubricants based on the application. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts. Specializing in end mills, cutting mills, and saws, the company is based in New York and manufactures its tools at facilities in Pennsylvania and Massachusetts.

Key Features

• (TiAlN is suitable for a range of materials, but TiCN or uncoated end mills are recommended for machining aluminum.) The carbide substrate is harder than high-speed or cobalt steel, making it more wear resistant at high speeds and.
• The 30-degree helix angle supports general-purpose applications.
• Two-flute designs offer the efficient chip removal, but more flutes provide a smoother finish.
• They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter.
• The Niagara Cutter C430 TiAlN-coated carbide square nose end mill has four flutes and a 30-degree helix angle for general-purpose machining on a range of materials.
• End mills are designed to remove material and create multi-dimensional shapes and profiles.