Interlux Nautical Enamel - Gallon NAU130-1

Description

Clear Epoxy Nautical Enamel cannot be applied directly to clear epoxy. Cleaner Mineral Spirits or Naphtha Thinning: Do not thin Ventilation and Humidity Control Apply in dry, well ventilated conditions, Avoid excessively humid conditions, over 80% relative humidity. Previously Painted Surface Poor Condition Completely remove old paint. Clear epoxy when. Fill any surface imperfections with approved filler for alkyd topside paint use. After all old paint has been removed, follow preparation instructions for bare fiberglass. HOW TO APPLY INTERLUX NAUTICAL ENAMEL Mixing Stir well before and during use. Flush with fresh water to remove the soap residue and allow surface to dry. Wipe the sanding residue off the surface with Mineral Spirits or Naphtha using the two-rag method. Economically priced and formulated to provide performance, value and reliability these finishes are durable and offers toughness, chemical resistance and hide and wear characteristics. Nautical Enamels are one-part professional quality interior and exterior alkyd enamels. Remove surface contamination by wiping down the surface with Mineral Spirits or Naphtha using the two-rag method. Pressure adjust as needed. Sand the entire surface with 220-grit sandpaper until a flat matte finish is obtained. Bare Wood Scrub the surface thoroughly with a stiff brush using soap and water. Nautical Enamels are ideal for decks, hulls and interiors in the marine environment. Do not apply Nautical Enamel directly to bare metal.

Key Features

• Economically priced and formulated to provide performance, value and reliability these finishes are durable and offers toughness, chemical resistance and hide and wear characteristics.
• Flush with fresh water to remove the soap residue and allow surface to dry.
• Nautical Enamels are available in a high gloss, semi gloss and flat finish and can be applied to any properly prepared fiberglass, metal or wood surfaces above the waterline, inside or out.
• Brush Natural bristle brush Roller Use a solvent resistant small closed cell foam roller Airless Spray: Tip Size: 0.33 mm/13 thou.
• After all old paint has been removed, follow preparation instructions for bare fiberglass. - Bare Wood Scrub the surface thoroughly with a stiff brush using soap and water.
• HOW TO APPLY INTERLUX NAUTICAL ENAMEL Mixing Stir well before and during use.